 Model
Range: 1.5 HP (1.12 KW)
Key Features
Optional Modifications
Low/Medium Output Flow Pumps
Incorporating 48 different models and a wide choice of pressure
outputs, this series of pumps is one of the most popular in
the Haskel range.
Capable of pressures up to 45,000 psi (3,100 bar) and flow
rates up to 5 gpm (19 L/min) these pumps can also be modified
to operate from an air drive pressure as low as 3 psi (0.2
bar) enabling a much wider minimum/maximum operating range
from each model.
By stacking air pistons in double or triple airheads, this
pump range can increased from 1.5 HP to 2.2 HP as described
on pages 18 thru 23. A noise reduction modification is available
for applications where noise level is an important criteria.
Mufflers available on all pumps.
High Output Flow Pumps
Available in a choice of 3 models, these high output, low
ratio pumps are capable of pressures to 1200 psi (82 bar)
and flow rates of up to 27 gpm (103 L/min).
These are "lift" pumps whereby the outlet pressure
equals the air drive x the pump ratio plus the inlet pressure.
Model DSTV-1.5 has a maximum air drive of 100 psi (7 bar)
and is capable of pressures up to 160 psi (11 bar). The model
ATV and DTV- 4 work on a maximum air drive of 150 psi (10
bar) and have a maximum pressure rating of 1200 psi (83 bar).
A noise reduction modification is available for applications
where noise level is an important criteria.
Key Features
Low/Medium Output
- Pressures to 45,000 psi
- Flow rates to 5 gpm (19 L/min)
- 48 models
- Modifications available for temperature extremes. Same
as 1/3 HP Model
High Output
- Pressures to 1200 psi
- Flow rates to 27 gpm (103 L/min)
- 3 models
- Modifications available for temperature extremes. Same
as 1/3 HP Model
All models in this series include a 1/2" air drive inlet
port and 1/2" exhaust.
Optional Modifications
| |
-C Air Controls (Filter, regulator, gage, shut-off) |
1/2 NPT |
| |
-CP Air Controls with precision regulator |
1/2 NPT |
| |
-CO Air Controls with recycle button |
1/2 NPT |
| |
-CPO Air Controls with precision regulator and recycle
button |
1/2 NPT |
| BOTTOM
INLET (designate "B" before ratio dash number,
"BR" on -B10, -B15, -B22 and -B32) 1-1/2 and
2HP pumps (not applicable to high output, chemical, 2.2
HP, or AWD series pumps). |
| 16821
|
Low
air pressure control feature -for operating at air pressures
as low as 3 to 4 psi (0.2 -0.3 bar) |
| 16831
|
Low
temperature modification for special sealing in air drive
for operating temperatures from as low as -20 degrees
F up to normal + 120 degrees F |
| 16834
|
Exhaust
adapter with back pressure balance piston |
| 17860
|
Electrical
stroke counter provision (Includes BZE6-2RQ micro switch)
|
| 25721
|
Mechanical
stroke counter - Installed (6 digit) |
| 27964
|
Interconnecting
inlet - Outlet tubing -1/2" female for 4:1 ratio
series pumps (ATV-4 or DTV-4) |
| 28000
|
Threaded
vent (or purge) ports on standard distance piece except
1.5:1 ratio |
| 28003
|
Test
port - Provides access port in pumps body between inlet
and outlet check valves for 1.5 and 2 HP pumps, -10 ratio
or higher, single acting |
| 28881
|
Air
pilot modification - 1/8 NPT Allows remote start/stop
of pump |
| 29376
|
Three
way cycling spool - for 1.5 and 2 HP single acting pumps
|
| 29702
|
Single
stroke modification |
| 29806
|
Double
distance piece - for 1.5 and 2 HP pumps only, except 1.5:1
ratio |
| 51050
|
Extreme
service cycling modification (Not recommended for long
stall periods) |
| 51331
|
EPR
(Ethylene Propylene) Static seals in wetted section. Applies
to distance piece pumps only. |
| 51345
|
Sour
gas drive provision to N.A.C.E. specifications 1.5 thru
2.2 HP distance piece pumps only, Single air head, Double
air head. |
| 53925
|
Severe
arctic low temperature service. -25, -35, -60, -100, -150,
-151, -225, -300, -450 ratios |
| 55305
|
Tube
ports (5/8 SAE) inlet and outlet - for 1.5 thru 2 HP pumps
15 pump minimum. |
| 55630
|
Stainless
steel (AISI-316) distance piece - for 1.5 thru 2 HP pumps
|
| 51056
|
Exhaust
/ pilot vent combiner |
| 52788
|
Viton
seals - air drive only - 1.5 thru 2.2 HP |
| 54885
|
Rotate
pump body 90 degrees from standard |
| 55516
|
Polyurethane
("W" seal) in "F"or "TV"
series pumps - except high output models |
| 59353
|
Noise
reduction kit. (Fitted). Not available on AFD, DFD, ASFD
& DSFD. |
Note: Not all modifications can be combined or used together.
Consult your Haskel Australia representative when requiring
more than one modification.
See also: Test Pac
200
|
