 |
||||||
 |
|
|
Pump AccessoriesLMI offers a complete line of accessories to customize and complete your installation.
|
|
||
|
Home : Haskel
Product Calalogue : Products
by Industry : Haskel Systems ------ Haskel Australia Pty Ltd ------
|
||||||
Digi-Pulse Flow Monitors solve the age-old question “How
do I know if my pump is pumping?” This innovative product
is designed to be used with our Type “9” Metering Pumps
to provide the user with verification of pump performance. If the
Flow Monitor detects output loss, it will shut the pump off and
close a switch that may be tied to an alarm. The alarm signal may
also be used to trigger a stand-by pump. 
LMI manufactures storage tanks in 10, 35, and 50 gallon sizes.
All tanks have a molded in recess for an LMI Metering Pump. The
35 Gallon Tank features a pump mounting location at the base of
the tank providing flooded suction which is ideal for off-gassing
chemicals and applications where very low output is required. All
tanks feature heavy wall construction of UV resistant polyethylene 
LMI's RFP Remote Flowmeter Pulser provides a simple method to
feed chemical in proportion to water flow. All that is required
is the Flowmeter Pulser and the appropriately sized LMI Pump. The
wall mount divider may be installed up to 100 feet from the flowmeter
for easy user access. No other timers, relays or control valves
are required. Flowmeters are available from 3/4” to 6” for
flow rates from 0.44 to 1300 GPM. 
LMI's diaphragm back pressure/anti-syphon valves apply positive
discharge pressure to a metering pump system and act to stabilize
the output of higher output LMI Metering Pumps when pumping into
low or no-pressure systems. Pressure relief valves are designed
to protect chemical feed systems from overpressure damage caused
by defective equipment or deadheading. Valves are available in
1/4”, 1/2”, and 1” sizes in PP, PVC, PVDF, and
316SS. 
This compact and economical valve performs four important functions
for your LMI pump:
The Bleed Four Function Valve is designed to be used with LMI
pumps that are handling chemicals that off-gas readily such as
sodium hypochlorite. It allows the gases to escape without causing
the pump to lose prime. The economical B4FV will fit new or existing
LMI pumps; there is no need to replace the entire head assembly.
Constructed of PVDF for durability and excellent chemical resistance. 
This molded polypropylene wall mount bracket is rugged and chemically
resistant. Molded with mounting holes to accept any LMI electronic
pump, installation is quick and easy. All of the hardware is included
to attach the bracket to a stud or block wall and to mount your
LMI pump. 
LMI offers a range of agitators with fractional horsepower motors
to fit our 35 and 50 gallon tanks. Impellers are available in Neoprene
R and epoxy coated stainless steel for a wide variety of chemicals.
Mounting hardware and a pump suction tube wand are included to
complete the installation. 
Installation of a calibration cylinder on the suction side of
your LMI pump simplifies calibration. LMI offers Calibration Cylinders
in 200 ml, 1000 ml, and 4000 ml sizes to fit most LMI pump capacities.
Removable tops and sealed tops are available. See the drawings
in the Technical Service Section for typical installations. 